产 品 分 类

主   页 关于我们 公司动态 产品总览 技术支持 与我联系 诚聘英才 仪器租恁 出差宝典

联系信息 Contact Info:

 
 

友情链接 :

  汎睿科技有限公司

 
 
     
   
 

 
 
  PL-200高通量自动玻片加载系统 Automatic Slide Loader   
 

关键字:英国PRIOR公司提供显微镜电动平台;英国PRIOR公司;PL-200高通量自动玻片加载系统;Automatic Slide Loader

 
 

 

 
 
 

Prior Scientific Slide Loader PL-200 (自动化玻片载台)荣获2009Laboratory Equipment Magazine 读者最佳票选奖,对于Prior所有的成员,这是最大的激励与敬意,特别是在研发与生产制造部门的工作人员。

Prior PL-200(自动化玻片载台)对于实验室的显微研究领域提供了一个重大的进步,它整合了PriorH101A高精度自动载物台,能够做到高精度的自动化玻片检测应用.

200的玻片的容量,代表的就是可以在无人操作的情况下,可以自动化完成好几个小时的玻片检测工作。

   
 

关键性能;

  最大可装载200块玻片, 15-25秒的加载时间
  抽取式片夹,安全可靠
  可选购条形码阅读器
  方便易用的软件整合与兼容显微镜平台设计
   
       
 
   

 

Prior PL-200 Slide Loader 高通量自动玻片加载系统是一套先进的显微镜玻片自动载台系统,最多可放置200片玻片,结合Prior精准的自动载物平台,可完成显微样本自动取相拍照,达到无人看顾,自动换片、自动定位、自动拍照的目标。

 

 

 

 

 

PL-200可搭配四个玻片架,每个玻片架的容量可放置50个玻片,系统会自动侦测感知玻片架,并且自动判定玻片架是否被移除或安装。当系统侦测到新的玻片架时,先进的玻片侦测系统会自动侦测玻片的数量及玻片的个别位置。

 

 

 

 

 

为了确保数据的正确性可以完整的关联到每一个玻片,并且能够符合Good Laboratory Practice (GLP)的要求,可再选择搭配1D2DBarcode Reader使用。另外,还附带一套完整的软件开发工具,可以很容易的与第三方软件进行整合。

 
   
 

50片玻片装夹

         条形码阅读器 精准控制玻片装夹进行装载与退出
`
   
       
 
   
 
性能参数:
Footprint:   0.16m2
尺寸大小 : 35cm(W) x 50cm(D) x 68cm(H)
Load Speed 装载速度 : 15-25s
兼容 Nikon, Olympus, Leica and Zeiss 正立显微镜 ,详情可咨询.
 
选购:
BarCode Reader 条形码阅读器 :1D or 2D Reader
 
 
 
 
   
     
 

描述:

 
 

The PL-100/PL-200 Slide Loaders are advanced systems for automatic slide handling in a variety of microscope applications. Both units are fully supported by both Objective Imaging's Surveyor software with Turboscan, Molecular Devices MetaMorph image acquisition and analysis software as welll as the Media Cybernetics ImagePro 7.0.1 software.

The PL-200 model is designed for 1x3 slides and accommodates up to 200 slides that are housed in four removable slide racks, each of which holds up to fifty slides. The PL-100 model is designed for 2x3 slides and is capable of handling up to 100 slides(as shown in photo below) which are housed in two racks of fifty. Sensors on the loader monitor the presence of the slide racks so the system can intelligently respond when racks are changed in the middle of a run for example. Installation of a rack on the loader initiates a unique slide detection system which automatically identifies the location of the slides. Prior has optimized both to provide the highest productivity with a complete system capable of performing load/unload cycles in as little as 24s. The units can be used with existing microscopes simply by adding the appropriate Prior scanning stage.

Prepared specimen slides are precious, often unique, and need to be handled with care. In addition to the slide retaining design of the slide racks, a range of further safety features have been included in the units to minimize the risk of damage to slides. The slide gripper includes a sensor to detect the presence of a slide. If the state of this sensor changes due to an absent slide for example, the system will stop and report an error message. A similar approach is taken on the scanning stage where a sensor identifies if a slide is present on the stage. Slide scanning will not take place for example, if a slide is not successfully placed onto the stage. A third sensor is used to monitor the position of the slide relative to the stage. If the user inadvertently moves the scanning stage in the Z axis, collisions are avoided by this sensor.

 
   
   
 

 注:产品信息若有变更恕不另行通知

 
   
 

Contact Us             Sitemap                    Email:  Sales@gzyaco.com
 TEL:008620-83212019                FAX :008620-83212033 

   Copyright © 2007 元奥仪器有限公司. 版权所有.

电信与信息服务业务备案
粤ICP备11101124